Isotech Temperature Calibrator - Fastcal Low - Medium - High

Industrial Temperature Calibrators Fast-Cal Range Fast-Cal - the product range you designed ! During early 2004 20 experienced engineers from many parts of the world were asked to produce their ideal specification for industrial calibration. Their top ten requirements, in order of priority, are listed below. 1. Rugged 2. Lightweight 3. Easy to use on site 4. Low cost/ high benefit ratio 5. Fast response, high stability 6. Time saving features 7. Multiple sensor testing 8. Software 9. Modern design 10. Compliant with the latest regulations They told us “ Whatever you do don’ t use membrane keypads. They look great new, but after a year of being poked with ball point pens and screwdrivers the results have to be seen to be believed.” We were going to include a picture but we might upset the competition. The result is the range of Fast-Cal products. Key Features - Rugged, hard-wearing stainless steel case. - Hygienic with no paint to chip or flake. - No membrane keypads. - Lightweight, between 6.35 and 6.60 kg depending upon the model. - Easy to use on site. A soft, lightweight shoulder case makes transporting the Fast-Cal effortless. - Fast response, high stability. Isotech has put 24 years of manufacturing and design experience into optimising the performance of the Fast-Cal. Compare the specifications overleaf. The block gradients are minimised by non-linear heating and cooling profiles to compensate for end losses to ambient temperature. - The Fast-Cals are so easy to use you hardly need the manual. - The Medium and High Fast-Cals incorporate a built-in Insert holder for ultra fast changes and restarts of calibration cycles. - The Fast-Cals ( excepting the 2010) all have the same sized removable inserts which can be drilled to your exact requirements. A standard insert is included, see the drawing on the following page. - Benefit from the PC interface. Extra software is available for automatic calibration. - The Fast-Cal design is modern and complies with all the relevant requirements and directives which are applicable. - The Fast-Cals come with a certificate traceable to National Standards. Five point UKAS Certification is also available. - Mains power variance immunity has been standard on all Isotech dry block calibrators since their conception. This feature resolves problems with fluctuating power supplies which if not acknowledged causes instability in the bath. BASIC OR COMPLETE EXPLAINED FAST-CALS ARE AVAILABLE IN BASIC OR COMPLETE MODELS : A BASIC DRY BLOCK CALIBRATOR The thermometer under test is compared to the dry block controller value. useful for moderate temperature ranges and quick testing. AN ISO 9000 CALIBRATION SYSTEM A thermometer under test is compared to a calibrated standard, for true traceability and clearly meets the requirements of ISO9000. Complete models include a semi-standard probe. See order form for details. FAST-CAL OPTIONS: Metal Block Insert: 907-02-03 Standard Insert Included ( Low and Medium) 907-02-03b Blank Insert ( Low and Medium) 907-02-03c Special Insert ( Low and Medium) 907-02-03d Standard Insert Included ( High only) 907-02-03f Blank Insert ( High only) 907-02-03g Special Insert ( High only) Standard Insert Low, Medium, High Ø 8.0mm x 140mm deep Ø 6.5mm x 140mm deep Ø 4.5mm x 140mm deep Ø 4.5mm x 140mm deep M4 Extraction Hole Model No. FAST-CAL HTM 2010 FAST-CAL LOW FAST-CAL MEDIUM FAST-CAL HIGH Range at 20degC -35 to + 140degC -35 to + 140degC 30 to 350degC 35 to 650degC Stability 0.02degC 0.02degC 0.03degC 0.03 to 0.05degC Accuracy-Basic ± 0.2degC ± 0.2degC ± 0.3degC ± 1degC ( 500degC) ± 2degC ( 650degC) Accuracy-Complete* ± 0.15degC ± 0.15degC ± 0.2degC ± 0.5degC Heating Time -30 to + 140degC -30 to + 140degC 50 to 350degC 50 to 650degC In 15 minutes In 15 minutes In 15 minutes In 20 minutes Cooling Time + 140 to 0degC + 140 to 0degC 350 to 100degC 650 to 300degC In 15 minutes In 15 minutes In 40 minutes In 20 minutes Calibration Capacity 145mm depth 148mm depth 148mm depth 148mm depth 8Ø , 6.5Ø , 3 x 4.5Ø 25mm Ø 25mm Ø 25mm Ø Power 150W 150W 750W 750W Traceable Certificate Included Included Included Included UKAS Certificate Extra Extra Extra Extra PC Communications Included Included Included Included Software Included Included Included Included 4-20mA Input Complete Models Complete Models Complete Models Complete Models Thermal Switch Test Complete Model Complete Model Complete Model Complete Model with Software with Software with Software with Software Ramps and Dwells Yes with Software Yes with Software Yes with Software Yes with Software Dimensions 228 x 248 x 143mm 228 x 248 x 143mm 228 x 248 x 143mm 228 x 248 x 143mm Weight 6.60kg 6.60kg 6.35kg 6.35kg For further information, please feel free to contact us at : sales@ wahanamandiri.com